Knowledge on maintenance of insulating glass equipment

要使得中空玻璃設備運用作用理想，玻璃清洗完全潔凈，大程度的延伸其運用壽命，就必需要留意其根本的保養知識。在設備運用過程中留意對其進行正確的保養。如何保養，如此表示。

In order to make the use of hollow glass equipment ideal, glass cleaning completely clean, the maximum extension of its service life, it is necessary to pay attention to its basic maintenance knowledge. In the process of equipment operation, pay attention to proper maintenance. How to maintain it, experts say.

中空玻璃設備的保養總體辦法不難，要害是要做好對設備滑輪的保養光滑，確保作業時分的電壓安穩，防備電機呈現焚毀的狀況，確保設備能夠正常運轉就能夠了。如果設備在作業期間發生了嚴重的毛病，那么就需求延聘的修理人員前來處理。非人員切莫私行拆機修理。此外需求留意的一點是，當毛病發生需求檢修的時分，必需要先把總電源給切斷了。在外，還需求留意的事項包含如下：

Maintenance of hollow glass equipment is not difficult in general, the key is to do a good job on the equipment pulley maintenance smooth, to ensure that the operation of the voltage stability, prevent the motor from burning down, to ensure that the normal operation of the equipment can be enough. If serious problems occur during the operation of the equipment, then the need to hire professional repair personnel to deal with. Non professionals should not privately repair the machine. In addition, the need to pay attention to the point is that when the problem occurs when the need to repair, it is necessary to first cut off the total power supply. Besides, the matters needing attention are as follows:

對傳送輥的保護。中空玻璃設備的要害零件傳送輥必需要留意定時進行光滑處理，在設備運轉之前要先查看器光滑狀況，看油位線標是否正常，油位必需要堅持在滑標的中心線以上才能夠。

Protection for conveyor rollers. The key parts of the hollow glass equipment transfer roller must pay attention to the smooth processing at regular intervals, before running the equipment to check the smooth condition of the device, to see whether the oil level marker is normal, oil level must adhere to the center line above the sliding mark to be able to.

設備系統的水路保護。設備內的水箱要確保系統水循環的正常，每周要對水箱進行一次完全的清洗，要對噴水嘴進行慣例性的查看，一旦發現有堵塞就要立刻進行疏通整理。此外還有風路的保護，設備風機的運轉狀況要堅持杰出安穩。

Waterway protection for equipment systems. The water tank in the equipment should ensure the normal water circulation of the system. The water tank should be cleaned completely once a week. The nozzle should be checked routinely. Once the blockage is found, the water tank should be dredged immediately. In addition, there is protection of the wind roads, and the operation of the equipment fans must be excellent and stable.