打膠機在現代化工業生產中的地位非常高，能通過三軸聯動執行各種不同需求的點膠工作，無論封裝環節，還是點膠對接環節的實用性非常強，決定產品質量好壞源于打膠機保養工作是否做好，通過雙組份打膠機保養和調試能使點膠效果更好。

Glue dispenser plays a very high role in modern industrial production. It can perform dispensing work with different demands through three-axis linkage. The practicability of both packaging and dispensing connection is very strong. The quality of products depends on whether the maintenance of the glue dispenser is well done. The maintenance and debugging of two-component glue dispenser can make the dispensing effect better.

保養保證機械臂運轉流程

Maintenance and operation process of mechanical arm

打膠機保養工作可大可小，往小方面來說只需要長期對工作平面上一些異物灰塵擦去即可，如果機械手工作不夠流暢，添加一點潤滑油，保證“活動關節”能順暢移動，防止出現點膠不到位的情況。

The maintenance work of the glue applicator can be large or small. To a small extent, it only needs to wipe away some foreign matters and dust on the working plane for a long time. If the manipulator is not smooth enough, add a little lubricating oil to ensure that the "movable joint" can move smoothly and prevent the situation that the glue dispensing is not in place.

每月的情形計劃設定

Monthly scenario plan setting

使用打膠機的廠家每個月進行一次點膠設備大清洗工作，市面上一些大型點膠機具備自動清洗功能，而小型打膠機無法進行自動清洗，哪么就需要使用人工方式進行，所以打膠機保養需要有步驟，這樣才能夠把需要清洗的位置，搞干凈。

The manufacturer who uses the glue dispenser shall clean the glue dispenser once a month. Some large glue dispensers on the market have the function of automatic cleaning, while small glue dispensers cannot be cleaned automatically, so manual method is required. Therefore, the maintenance of the glue dispenser needs steps, so that the positions that need to be cleaned can be cleaned.

調試與點膠環節的關系

Relationship between debugging and dispensing

調試環節跟雙組份打膠機保養都是非常重要，大多數點膠參數由點膠調試環節決定的，如果在點膠工作中進行參數更改可能會造成點膠誤差，調試工作可以在打膠機配備手動操作示教盒上執行，這樣能夠保證產品被點膠的質量。

Debugging and maintenance of two-component glue dispenser are very important. Most dispensing parameters are determined by dispensing debugging. If parameters are changed during dispensing, dispensing errors may occur. Debugging can be carried out on the manual operation teaching box equipped with the glue dispenser, which can ensure the quality of products being dispensed.

使用控制器鏈接PC端模擬進行，手動操作示教盒可以記錄下各個工作點坐標，然后能實現高重復性陣列式排列點膠，通過PC端能修改的東西比較多，操作人員需要有一定的編程知識才行，如果調試環節做的好，哪么打膠機保養的次數可以適當降低，清洗的地方也可以減少。

Use the controller to link the PC end for simulation. The manual operation of the teaching box can record the coordinates of each working point, and then realize the highly repetitive array dispensing. There are many things that can be modified through the PC end, and the operator needs to have some programming knowledge. If the commissioning link is well done, the number of times for the maintenance of the glue dispenser can be appropriately reduced, and the cleaning place can also be reduced.

通過打膠機保養調試能使點膠效果更好的相關事項就到這里了，你對此有什么疑惑或者需求可以隨時來我們網站http://www.cztaiyue.com進行了解！

This is all for matters related to the better dispensing effect through the maintenance and debugging of the dispensing machine. If you have any doubts or needs, please come to our website at any time http://www.cztaiyue.com Get to know!