雙組份打膠機的日常使用注意事項
雙組份打膠機要有效延長其使用壽命,在日常生活中就需要注意它的維護和保養。那么雙組份打膠機日常維護和保養方法有哪些呢?
In order to effectively extend the service life of the two-component sealant dispenser, attention should be paid to its maintenance in daily life. So what are the daily maintenance methods of two-component sealant dispenser?
要完全掌握了雙組份打膠機的操作知識,再進行設備的操作。開機前應先檢查一下電源、電壓是否穩定。開啟機器后,要注意機器有沒有發出不正常的聲音,如果有,應立刻關閉機器。如果使用的設備需要與皮膚接觸時,應當提前做好防護措施。
It is necessary to fully master the operating knowledge of the two-component sealant dispenser before operating the equipment. Before starting the machine, check whether the power supply and voltage are stable. After starting the machine, pay attention to whether the machine makes abnormal noise. If so, shut down the machine immediately. If the equipment used needs to contact with skin, protective measures shall be taken in advance.
在大量使用前,請先小量試用,掌握產品的使用技巧,以免出現差錯。當測試無問題后,再用雙組份打膠機進行大批量生產。
Before using the product in large quantities, please try it in small quantities to master the use skills of the product to avoid mistakes. When there is no problem in the test, use the two-component sealant machine for mass production.
批量生產的質量一致性對產品品質來講是重要的,因此為保證膠條的質量,在生產前進行比例測試。比例測試目的在于檢測A、B膠的供料量是否準確。
The quality consistency of batch production is important to the product quality. Therefore, in order to ensure the quality of the adhesive strip, the proportion test shall be carried out before production. The purpose of proportion test is to check whether the feeding amount of glue A and glue B is accurate.
A與B的具體比例應根據膠水供應商提供的數據進行設置,測試結果對照技術參數,在合理誤差內均可認為是準確的比例。在保證比例準確的時候,使用者就可以進行量產了。
The specific proportion of A and B shall be set according to the data provided by the glue supplier. The test results can be considered as accurate within a reasonable error compared with the technical parameters. When the proportion is accurate, users can conduct mass production.
雙組份打膠機在很多行業都會用到,企業在使用雙組份打膠機過程中不僅會考慮到雙組份打膠機的點膠質量、工作效率,還會考慮到它的使用壽命。以上就是有關的方法了,您對此有什么想咨詢的隨時來我們網站
http://www.cztaiyue.com看看!
The two-component glue dispenser is used in many industries. When using the two-component glue dispenser, enterprises will not only consider the dispensing quality and work efficiency of the two-component glue dispenser, but also consider its service life. The above is the relevant method. If you have any questions, please come to our website at any time http://www.cztaiyue.com have a look!
上一篇:雙組份打膠機在使用中會出現怎樣的問題?
下一篇:打膠機膠閥滴漏及出膠大小不一致的原因