如何做雙組份打膠機的日常的維護工作
在時代發展迅猛的過程中，越來越多的工廠使用雙組份打膠機來為自己增加產能和產品品質，那你們知道它的日常維護保養工作是怎樣子的呢，帶你一起來學習一下如何做
濟南雙組份打膠機的日常的維護工作吧。
In the process of rapid development of the times, more and more factories use two-component glue dispensers to increase their production capacity and product quality. Do you know how the daily maintenance work is? Let's learn how to do the daily maintenance work of two-component glue dispensers.
每天工作結束后，應該把設備的機身擦拭干凈，這樣會是設備美觀更持久一些；每天工作結束后都要排放油水分離器積聚油水；我們要時常不定時地檢查一下氣路油霧器的潤滑油情況，要保證氣動元件的潤滑；
After each day's work, the machine body should be wiped clean, which will make the equipment more beautiful and lasting; The oil-water separator shall be drained to collect oil-water after work every day; We should check the lubricating oil condition of the air way oil atomizer from time to time to ensure the lubrication of the pneumatic components;
如果不再連續工作的話，就應該立刻馬上把膠槍里的殘留膠水給干凈；在工作的過程中我們要注意以下各個壓力表的讀數是否都正常，不然會造成產品品質的不良和妨礙正常的生產效率；每天工作結束之后一定要做好工作日記，方便以后篩查問題所在。
If it is no longer working continuously, the residual glue in the glue gun should be removed immediately; In the process of work, we should pay attention to whether the readings of the following pressure gauges are normal, otherwise it will cause poor product quality and hinder the normal production efficiency; After each day's work, you must keep a work diary to facilitate future screening of problems.
雙組份打膠機的維護保養工作份兩個等級，分別是一級和二級，現在先來說說一級的維護保養工作：一點，每個周都要檢查機械運動部件的連接情況和潤滑情況，如果潤滑度不夠記得要添加潤滑脂；二點，每隔15個工作日就要清洗一次混合器，也可以是半個月清洗一次。
There are two levels of maintenance for two-component sealant dispenser, Level I and Level II. Now let's talk about Level I maintenance: First, check the connection and lubrication of mechanical moving parts every week. If the lubrication is not enough, remember to add grease; At 2:00, the mixer should be cleaned every 15 working days or half a month.
接下來就是二級的維護保養工作：一點，每個月都要更換配件有油霧器、閥和主泵、配比泵的潤滑油等；二點，每個月都要把過濾器、針閥清洗一次，還要檢查一次閥的泄壓壓力；三點，每年把主泵、配比泵和輔料泵以及閥都清洗一次。
The next step is the second level maintenance: First, the accessories such as oil mist atomizer, safety valve, lubricating oil of main pump and proportioning pump should be replaced every month; Second, clean the filter and needle valve once a month, and check the pressure relief pressure of the safety valve; Third, clean the main pump, proportioning pump, auxiliary material pump and safety valve once a year.
How to do the daily maintenance of the two-component sealant dispenser? The above is the answer to the question. If you have any questions, please come to our website http://www.cztaiyue.com Consult!
上一篇：雙組份打膠機的運用情況分幾方面看
下一篇：用好打膠機你就要知道哪些事
