如今為了迎合工業自動化生產的的需求，打膠機設備被廣泛運用于更廣泛的領域，如:半導體、電子元器件等!碰巧這些領域?qū)Υ蚰z機的生產工藝要求很高，那么如何才能保證打膠機的點膠精度呢?下面濟南雙組份打膠機廠家為您講解吧。

Nowadays, in order to meet the needs of industrial automation production, the glue applicator equipment is widely used in a wider range of fields, such as semiconductors, electronic components and so on! It happens that these fields have high requirements on the production process of the gluing machine, so how can we ensure the dispensing accuracy of the gluing machine? Let's talk about the Jinan two-component gluing machine manufacturer for you.

1、打膠機用量的設定

1. Setting of glue applicator dosage

一般來說，打膠機的尺寸應該是產品間距的一半，這樣可以保證組件有足夠的膠水進行粘接，不會有多余的膠水溢出，讓打膠機的點膠速度更快更準確!

Generally speaking, the size of the gluing machine should be half of the product spacing, so as to ensure that the components have enough glue for bonding, and there will be no excess glue overflow, so that the dispensing speed of the gluing machine is faster and more accurate!

2、自動上膠機點膠壓力設定

2. Automatic glue dispenser dispensing pressure setting

自動上膠機點膠壓力的設定是非常重要的。如果打膠機的壓力過高，膠水就會溢出。如果壓力過低，就會出現泄漏或斷續點膠。因此無法達到產品所要求的點膠工藝，導致產品合格率低，工作效率低!

It is very important to set the dispensing pressure of automatic glue dispenser. If the pressure of the glue applicator is too high, the glue will overflow. If the pressure is too low, leakage or intermittent dispensing will occur. Therefore, the dispensing process required by the product cannot be reached, resulting in low product qualification rate and low work efficiency!

3、打膠機點膠針的選擇

3. Selection of dispensing needle for glue applicator

打膠機的針的選擇應根據產品的大小和膠點的直徑來確定。一般來說，打膠機點膠針的大小應該是膠點大小的一半。打膠機的針太大會造成膠水溢出，影響點膠精度!

The needle selection of the glue applicator shall be determined according to the size of the product and the diameter of the glue point. Generally speaking, the size of the dispensing needle of the glue applicator should be half of the size of the glue point. The needle of the glue applicator is too large to cause glue overflow and affect the dispensing accuracy!

4、自動上膠機針與工作面間隔設定

4. Interval setting between needle and working face of automatic gluing machine

不同的打膠機所使用的點膠針也不同。有些針頭有一定程度的停止，而有些針頭沒有。因此，掌握針與工作面之間的點膠間隔十分重要。點膠前，針與工作面之間的間隔應進行校準。

Different dispensing machines use different dispensing needles. Some needles stop to some extent, while others do not. Therefore, it is very important to master the dispensing interval between the needle and the working face. Before dispensing, the interval between the needle and the working surface shall be calibrated.

5、打膠機膠水粘度的選擇

5. The choice of glue viscosity of glue applicator

打膠機的膠水粘度大，膠點小，容易導致拉絲。打膠機黏度小，膠點大，可能導致透膠現象。因此，選擇合適的膠水粘度的打膠機是非常重要的！

The glue viscosity of the gluing machine is large and the glue point is small, which is easy to lead to wire drawing. The glue applicator has small viscosity and large glue spots, which may cause glue penetration. Therefore, it is very important to choose the glue machine with the proper glue viscosity!

如何才能保證打膠機的點膠精度呢？我們從五個方面來講了講這個問題，當然如果您對此有什么疑惑的話，歡迎來我們網站http://www.cztaiyue.com做咨詢。

How can we ensure the dispensing accuracy of the gluing machine? We have discussed this issue from five aspects. Of course, if you have any doubts about this, please come to our website http://www.cztaiyue.com Consulting.