Since summer, various projects have been started one after another, and orders for hollow glass are also increasing. Some enterprises have begun to plan to expand the scale, increase the production capacity of factories, and purchase some machinery and equipment instead of manual operation. One by one, someone asked me about the two-component glue machine in the background. Today, Xiaobian is here to introduce the requirements of the two-component glue machine on the site environment, so that you can understand.

　　臥式雙組分打膠機是一種什么樣的設備?它對車間環境有什么要求?很多人對此知之甚少。即使對于人士來說，對雙組份膠機的了解，其實也只是停留在它的實際使用上。然而，對橡膠機械的認識，停留在其使用水平上一直十分困難。那么，對臥式橡膠機車間環境的要求是什么?

　　What kind of equipment is a horizontal two-component glue beater? What requirements does it have for the workshop environment? Many people know little about it. Even for professionals, the understanding of the two-component glue machine is only in its actual use. However, it has been very difficult to understand the rubber machinery at its level of use. So, what are the requirements for the environment of the horizontal rubber machine workshop?

　　，讓我們談?wù)剬龅孛娣e的要求，臥式膠機與立式膠機是不同的。立式膠機對廠房面積要求相對較高，保守估計要50的地方。和小尺寸的要求打膠機廠房面積小得多,需要的地方不到十平米只可以存儲,主要的是因為可以把任意設備體積小,不需要打膠機騰出空間來存儲技術。

　　First of all, let's talk about the requirement of site area. Horizontal rubber machine is different from vertical rubber machine. Vertical rubber machine requires relatively high plant area, conservatively estimated to be 50 square meters. Small size requiring gluing machine workshop area is much smaller, need less than 10 square meters can only be stored, the main reason is that any equipment can be small, do not need gluing machine to make room for storage technology.

　　其次，我們想說的是橡膠機對地面平整度的要求，這也是近參加北京國際玻璃展覽會的廠家被問到多的問題。小型臥式上膠機對地面平整度要求不高。我們的工程師在設備的初始開發階段就考慮了地面的平整度，所以在開發過程中也注重解決這個問題。為解決地面不平對打漿機的影響，在設備中特別增設了專用設備。當然，小編這也要強調，雖然設備對地面平整度要求不高，但也不能布滿坑洼。

　　Secondly, what we want to say is the requirement of the rubber machine for the smoothness of the ground, which is also the most frequently asked question by the manufacturers who recently participated in the Beijing International Glass Exhibition. Small horizontal gluing machine has low requirement for ground smoothness. Our engineers considered the leveling of the ground in the initial development stage of the equipment, so they also paid attention to solving this problem in the development process. In order to solve the influence of ground unevenness on beater, special equipment has been added to the equipment. Of course, Xiaobian should also emphasize that although the equipment does not require high ground smoothness, it can not be full of pits and holes.

　　然后我們又說了上膠機對工廠的溫度、濕度要求，作為設備對上膠機本身對工廠溫度要求不高，一般應安裝在干燥、無粉塵、無腐蝕性氣體、溫度在0 ~ 40度的車間內。這些要求與其他設備的要求沒有太大的不同。

　　Then we said the temperature and humidity requirements of the glue machine for the factory. As equipment, the temperature requirements of the glue machine itself are not high. Generally, the glue machine should be installed in a dry, dust-free, non-corrosive gas, temperature in the workshop of 0-40 degrees. These requirements are not very different from those of other equipment.

　　后小編跟大家說一下膠機設備對電源的要求。小型橡膠打漿機的電源與其它小型設備的電源相同。此外，還需要0.6-0.8mpa的壓縮空氣設備。

　　Finally, Xiaobian tells you about the power requirements of rubber machine equipment. The power supply of small rubber beater is the same as that of other small equipment. In addition, 0.6-0.8 MPa compressed air equipment is required.